| Customization: | Available |
|---|---|
| Type: | Injection & Puncture Instrument |
| Material: | PVC Tube, Medical Grade PP |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main accessories: Vented spike, Drip Chamber, fluid Filter, flow regulator, latex tube, Luer Lock connector.
Protective cap for closure piercing device made of polyethylene with internal thread that prevents the bacteria from coming in, but allows the entrance of ETO gas. Apporoximately 15 drops/ml,20 drops/ml
Closure piercing device made of white PVC, with sizes according to ISO 1135-4 standards. Apporoximately 15 drops/ml,20 drops/ml
Drip chamber made of soft PVC, sizes according to the ISO 8536-4 standards.
Flow Regulator made of polyethylene.
Soft and kink resistant medical grade PVC tubing .
Terminal fitting protective cap (luer slip or Luer-lock adapter upon request) made of PVC or polystyrene, according to the ISO 594/1 and 594/2 standards.
Terminal fitting protective cap made of polyethylene.
Options available :
- With or without air vented spike;
- With or without needle;
- With or without "Y" injection port;
- Luer lock or luer slip connector;1. Infusion set sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
1. This for the clinical disposable use, use after opening.
2. Take down protect set , insert bottle the plug puncture device drains away interior air.
3. Uses the rate-of-flow controller to adjust the drop number, according to conventional infusion operation.
4. Stop use if package is punctureed or the protective cap falls off.
5.For single use, damage after use.
| 1 | Name | Medical Disposable Infusion Sets, Medical Disposable I.V. Sets |
| 2 | Scope of application | disposable use of venous transfusion , hypodermic injection in clinic |
| 3 | Sterilization | Sterilized with E.O. gas. Non-toxic, Non-pyrogenic |
| 4 | Packing | unit packing: PE bag, blister packing, paper plastic packing |
| 5 | Warns | Single use only. Reuse is forbidden. Stop use if the pack is damaged |
| 6 | Advantages | Highly sharp needle points, light puncture force, less pain to patient |
| 7 | Warranty | 5 Years |
| 8 | Others | OEM offered. The specific details we can do as the clients request |
| Type | Options available | |
| 1 | Basic Type or Y-injection Type | With or without "Y" injection port |
| 2 | Needle | With needle (with mounted needle or with side needle )or without needle, needle size according to customer request |
| 3 | Spike | Plastic Spike or Steel Spike, Single Spike or Double Spikes |
| 4 | Airvent Type | Luer lock or luer slip connector |
| 5 | Drip Chamber | Blow molding drip chamber or injection molding drip chamber |
| Data Sheet | |
| Piercing device | Made of medical grade white ABS, with or without air Inlet, 3 or 4 holes size according to ISO8536-4 Standards |
| Protective cap | Made of PP or PE |
| Drip chamber | Made of soft PVC, size according to ISO8536-4 Standards, 4.5cm--7cm in length. |
| Fluid filter | Support is made of ABS or PE, nylon net, mesh size: 15 micron. |
| Air inlet | Cap is made of red, white, or blue PP |
| Flue filter | Repellent filter-PP support, hydrophobic filtering paper, made of Acrylic resin and nylon. |
| Flow regulator | Made of PP or ABS, normal shape, small size or horned Shape, large size. |
| Injection site | Latex cone, rubber cone, synthetic rubber cone, Y site- Made of hard transparent PVC+ injection |
| Soft tubing | Made of soft medical grade PVC, diameter 3x4mm, 150cm in length, or adjust according to requirement |
| Terminal connector | Made of PE, PVC, luer lock or luer slip |
| Components assembly | By gluing with solvent cyclohexane |
Product Show
Factory Show
){kind=link}